What are lithium tantalate LiTaO3 wafers used for?

Lithium tantalate LiTaO3 wafers are used in nonlinear optics, passive infrared sensors, motion detectors, terahertz generation and detection, surface acoustic wave devices, cell phone components, and pyroelectric research.

What is the difference between optical grade and saw grade LiTaO3 wafers?

Optical grade LiTaO3 wafers are typically selected for optical and photonic experiments where surface quality and light transmission are important. Saw grade LiTaO3 wafers are commonly used for acoustic wave, sensor, and device development applications.

Which LiTaO3 crystal cuts are commonly available?

Common lithium tantalate wafer cuts include X-cut, Y-cut, Z-cut, and rotated Y-cut options such as 36 degree and 128 degree off-cut wafers.

What specifications should be included when requesting a LiTaO3 wafer quote?

A LiTaO3 wafer quote request should include crystal cut, diameter or chip size, thickness, polish type, grade, quantity, and any optical or surface quality requirements.

Lithium Tantalate LiTaO3 Wafers

Get Your LiTaO₃ Wafer Quote FAST! Or, Buy Online and Start Researching Today!

Lithium tantalate LiTaO3 wafer for optics and SAW device research

Lithium Tantalate (LiTaO3) Wafers in stock:

LiTaO3 optical grade, X-cut, 10x10x0.5mm, DSP
LiTaO3 saw grade, X-cut, 10x10x0.5mm, SSP
LiTaO3 saw grade, X-cut, 3" Dia x 0.5mm wafer, SSP
LiTaO3 optical grade, Y-cut, 10x10x0.5 mm, DSP
LiTaO3 saw grade, Y-cut, 10x10x0.5mm, SSP
LiTaO3 Saw grade, Y-cut wafer with 128 degree off , 3" dia x0.5 mm , SSP-1
LiTaO3 Saw grade, Y-cut wafer with 36 degree off , 2" dia x0.5 mm , SSP-1
LiTaO3 Saw grade, Y-cut wafer with 36 degree off , 3" dia x0.4 mm , SSP
LiTaO3 Saw grade, Y-cut wafer with 36 degree off , 4" dia x0.35 mm , SSP
LiTaO3 Saw grade, Z-cut, 10x10x0.5 mm, SSP
LiTaO3 optical grade, Z-cut, 10x10x0.25 mm, DSP
LiTaO3 optical grade, Z-cut, 10x10x0.5 mm, DSP
LiTaO3 optical grade, Z-cut, 10x10x1.0 mm, DSP
LiTaO3 optical grade, Z-cut wafer, 2" Dia x 0.5mm , DSP
LiTaO3 optical grade, Z-cut wafer, 3" Dia x 0.5mm , DSP
LiTaO3 saw grade, Z-cut, 3"Dia x0.5mm wafer, SSP

Lithium Tantalate (LiTaO₃) Wafers for Research and Production

Lithium tantalate (LiTaO₃) is a crystalline oxide material known for its piezoelectric, pyroelectric, electro-optic, and nonlinear optical properties. These unique characteristics make LiTaO₃ wafers valuable for photonics, RF devices, sensor technology, and advanced semiconductor research.

Applications of lithium tantalate LiTaO3 wafers including SAW devices, terahertz research, nonlinear optics, and RF filters

LiTaO₃ wafers are commonly selected for applications requiring stable acoustic wave performance, infrared sensitivity, and optical signal processing. Researchers may choose optical-grade or saw-grade substrates depending on the intended use and surface quality requirements.

Common Applications of LiTaO₃ Wafers

Nonlinear optical devices and optical modulation
Passive infrared (PIR) sensors
Motion detection systems
Terahertz generation and detection research
Surface acoustic wave (SAW) devices and RF filters
Wireless communication and mobile phone components
Pyroelectric and advanced energy research

UniversityWafer, Inc. supplies LiTaO₃ wafers in multiple crystal cuts, diameters, thicknesses, and polish options for research and production environments. Please let us know your required specifications and quantity for a fast quote.

```

Lithium Tantalate (LiTaO3)

Lithium Tantalate (LiTaO3) Wafers in stock:

Lithium Tantalate (LiTaO3) Wafers for Research and Production

Common Applications of LiTaO3 Wafers

Lithium Tantalate (LiTaO₃) Wafers for Research and Production

Common Applications of LiTaO₃ Wafers